Flexi/Gummy/Rubber Base

Professional use gel polish base with strong adhesion and high resistance in 22FREE non-toxicity. The excellent adhesion and strengthening of the natural nail guarantees an extension of the durability of the gel polish. It is completely soak-off, so it also guarantees gentle removal without damaging the natural nail.

TECHNICAL DETAILS
• Durability: 21+ days
• Viscosity: thick gel consistency
• Self-leveling: strong
• Strength after drying: strong / hard
• Curing time in UV / LED lamp: 60 seconds
• Application procedure: three strokes with a brush and final fixation of the free edge of the nail
• Layers: 1 thin as a base + 2 thick modeling
• Effusion layer: yes
• Removal: gel remover
• Soak-Off/dissolving: yes
• Removal time: 10 - 15 minutes if the top layer is damaged by grinding or cutting
• Color: clear, depending on color
• Non-standard factors: weak nails, brittleness, dryness, discoloration, hormonal imbalance...
• Functional system: Gummy Base CERAMIC + Gel Polish CERAMIC + DRY Top/Matt CERAMIC or Gummy Base Ceramic + Dry Top/Matt Ceramic
• USE: professional


PREPARATION
1. Remove all old material. Take good care of the cuticle, clean the nail blank and clean the nails with a cleaner to remove oil and moisture from the nail. Dip a cellulose swab in the cleaning liquid and gently wipe the nail plate. Make sure you clean the entire area, especially the nail walls and the cuticle area.
2. Then use a very fine nail file to gently roughen (cover) the nail, again making sure to gently roughen the nail wall and cuticle area.
3. Use a new cellulose swab soaked in cleaner to remove dust after roughening the nail. Do not touch the surface of the nail with your finger to avoid the transfer of grease, which will prevent the material from adhering.


BASE + COLOR + TOP
1. Starting with the left hand, apply one layer of CERAMIC Gummy Base to damaged nails and material flexibility requirements (for advanced nail designers: an excellent method is the "fan-in-base" technique into the nail plate, which you can learn in detail in our courses or videos of our nail technologists.)
2. Apply 4 fingers at a time and cure in a professional UV / LED lamp for 60 seconds. The surface after polymerization will have a liquid layer that you cannot touch.
3. Continue applying thumb and then polymerize for 60 seconds. Keep your thumb in a straight position during curing.
4. Once you are done with all your fingers, you can move on to the next step.
5. You start applying the first layer of CERAMIC Gel Polish to the untreated effusion. Cure for 60 seconds. Continue with a second layer if necessary. Cure for 60 seconds in a UV/LED lamp. Do not rub or touch the effusion again. Keep the time to at least 60 seconds. Depending on the strength of the layer, even longer. Or you can leave in a natural look without using Gel Polish.
6. After polymerization, apply DRY Top or Dry Matt finishing gel to the effusion after polymerization. Allow to cure for 60 seconds.
7. After the finishing gel hardens, you are done. Dry Top and Dry Matt have no exudation.
8. Do the same steps with your right hand.
9. Finally, drop a drop of care oil and gently massage into the cuticle not only in the area of the nail Matrix, but also in the area of the nail walls.
10. If you wish to model the nail with Gummy Base CERAMIC and possibly lengthen the nail, proceed with the application of one layer of the base followed by a modeling layer. You can use unfinished templates for extensions. You can find more step-by-step information on this technique in our videos and tutorials.

REMOVAL
Gentle removal:
1. Sand or cut off the top layer of material.
2. Then wrap each nail in a remover impregnated foil (Hybrid Remover).
3. Make sure that the pad in the foil covers the entire surface of the nail and that the contact is firm.
4. Carefully press the foil onto the nails, paying special attention to the nail rollers.
5. Apply to all nails and leave for at least 10-15 minutes. The removal time can take as little as 10 minutes with the correct workflow, but it depends on many factors: the use of glue or dehydrator, the thickness of each layer, the degree of damage to the top layer, the damage and dryness of the nail and more.
6. We start to feel a gentle warmth on our nails.
7. Remove the film and use the orange stick to remove the material that has come out of the nail.
8. If removal is difficult, rewrap nails in foil for another 5 minutes. It is possible that the nail did not have enough heat or is thin and damaged, and therefore the adhesion of the material was stronger.
9. After removing the material, you can gently file the nail with a buffer and wipe it with a pulp swab soaked in the remover.
10. If we do not proceed further, i.e. by applying another gel polish system (before that, the nail would have to be degreased with a cleaner), we continue with a massage by applying oil or a nourishing serum to the cuticle and nail surface.

Removal with a grinder:

We select a suitable type of grinding machine and grind the material carefully. We use this method of removal only if we have sufficient experience with an electric sander. There is a risk of injury and grinding of the natural nail. Advantage - speed. Disadvantage - there is a risk of nail damage.

TIPS
• The perfect preparation before the gel polish system is the care system Russian manicure, which "lifts" our skin for 30 minutes and we get visually "under" the color
• The basis of success is also the art of really perfect coating of paint. We paint the nail with a thin-layer brush in three strokes with the final fixation of the free edge of the nail, the area near the cuticle can be precisely tightened with a micro-brush - detailer.
• If we buy a cleaner at home, then polishing the nails will guarantee a diamond shine that will last for weeks.
• Before applying the gel polish system, highly damaged, brittle, yellowed or frayed and damaged nails can be treated and nourished. For this purpose, we offer several products from our CARE collection.